technical data sheet adaptor sma plug C jack 32S105-K00L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-15; en 122110; mil-std-348 documents n/a material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact cube or equivalent aurodur?, gold pla ted dielectric ptfe gasket silicone coupling nut cube or equivalent gold, 0.1 m
technical data sheet adaptor sma plug C jack 32S105-K00L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 18 ghz returm loss 3 35db dc to 4ghz 3 24db 4ghz to 8ghz 3 20db 8 ghz to 18 ghz insertion loss 0.03 x db insulation resistance 3 5 x10 3 m w center contact resistance 3 m w outer contact resistance 2 m w test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) 200 w @ 2 ghz rf-leakage 3 100 db up to 1 ghz mechanical data mating cycles min. 500 coupling nut retention 3 270 n center contact captivation: axial 3 27 n radial 3 3 ncm coupling test torque max. 1.7 nm recommended torque 0.8 nm to 1.1 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 rohs compliant tooling n/a suitable cables n/a weight weight 3.97 g/pce draft date approved date rev. engineering change n umber name date rong fang 30/03/04 j_krautenbacher 21.07.16 e00 15 -1629 i_wallner 21.07.16 while the information has been carefully compiled t o the best of our know ledge, nothing is intended as representation or war ranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|